The VG Resource

(02-19-2014, 06:14 PM)mkbewe Wrote: [ -> ]Which is proportion of x,y,z? 1,?,1

(02-19-2014, 06:35 PM)scoobydude51 Wrote: [ -> ]ok now. where and how do you scale just the y axis? I am kind of new to 3ds max.

(02-19-2014, 07:10 PM)o0DemonBoy0o Wrote: [ -> ]

(02-19-2014, 06:14 PM)mkbewe Wrote: [ -> ]Which is proportion of x,y,z? 1,?,1

It's different for every game so there is no definite answer

(02-19-2014, 06:35 PM)scoobydude51 Wrote: [ -> ]ok now. where and how do you scale just the y axis? I am kind of new to 3ds max.

you don't have to use 3ds max. you could just scale it down in whatever 3d program you like to use.

(02-19-2014, 08:30 PM)scoobydude51 Wrote: [ -> ]now I am getting frustrated. THE MODEL IS SO TINY!!!! I tried making it bigger and ALL my 3D programs won't let me do it!!! and they have a small zoom limit and it stops zooming before i even get to the model!!! I don't think this is working. I CANNOT scale down. It is just impossible.


in 3ds max, the model is moving in the perceptive window and I lose it too quickly because it is getting smaller. and if I do fix it, it is just one pixel in that window!!!


please help me!!!

(02-19-2014, 08:37 PM)o0DemonBoy0o Wrote: [ -> ]

(02-19-2014, 08:30 PM)scoobydude51 Wrote: [ -> ]now I am getting frustrated. THE MODEL IS SO TINY!!!! I tried making it bigger and ALL my 3D programs won't let me do it!!! and they have a small zoom limit and it stops zooming before i even get to the model!!! I don't think this is working. I CANNOT scale down. It is just impossible.


in 3ds max, the model is moving in the perceptive window and I lose it too quickly because it is getting smaller. and if I do fix it, it is just one pixel in that window!!!


please help me!!!

in 3dsmax there is a small button in the lower right corner called Zoom Extents. click that and it will put all objects in the viewport

(02-19-2014, 08:44 PM)scoobydude51 Wrote: [ -> ]ok. the scale tool is not scaling. it is just moving it up and down at one axis. what just happened? (I am supposed to get a yellow triangle and I don't see that.)

(02-19-2014, 08:53 PM)o0DemonBoy0o Wrote: [ -> ]

(02-19-2014, 08:44 PM)scoobydude51 Wrote: [ -> ]ok. the scale tool is not scaling. it is just moving it up and down at one axis. what just happened? (I am supposed to get a yellow triangle and I don't see that.)

Are you sure your not using the Select and Move tool?

I'm not really sure how to help you here.

(02-20-2014, 10:11 AM)scoobydude51 Wrote: [ -> ]

(02-19-2014, 08:53 PM)o0DemonBoy0o Wrote: [ -> ]

(02-19-2014, 08:44 PM)scoobydude51 Wrote: [ -> ]ok. the scale tool is not scaling. it is just moving it up and down at one axis. what just happened? (I am supposed to get a yellow triangle and I don't see that.)

Are you sure your not using the Select and Move tool?

I'm not really sure how to help you here.

nope. I had the scale tool selected. I saw it on it before, but now it is gone!

(07-05-2012, 02:07 AM)blakegriplingph Wrote: [ -> ]I'm actually trying to rip models from Strawberry Shortcake: The Sweet Dreams Game. Karpo's 3D Object Converter can read model files from that game, but the character models appear to be mangled with only the head intact.

EDIT: NVM, the models did turn up, albeit at a different folder from what I expected. Only problem is that some faces are missing due to occlusion culling or something.

(06-06-2012, 03:17 PM)o0DemonBoy0o Wrote: [ -> ]In this tutorial, I will explain how I rip PS2 models.

What you will need:

PCSX2 0.9.8
Texmod
3D editor of your choice.
(I will be using 3dsMax 2010. You can get the student version for free at the Autodesk website)
A PS2 game you wish to rip from. (I will be using Dark Cloud)
(Note that not all ps2 games render in the same way.
This will be covered at a later time.)

Before starting, make sure that you have PCSX2 running fine on your computer.
All the default settings are what I use. I can't grantee it will work if you change anything.
here are the plugins I have set just encase

Spoiler

Next you want to make sure that you have Texmod extract to a folder somewhere on your computer and that your antivirus is not blocking you from using it.

Once that is sorted out lets get to ripping your model.

Once you open up Texmod you should be greeted with this

Spoiler

Just click on the folder and locate your pcsx2-r4600.exe
After that click on the "Logging Mode" tab and you should have this

Spoiler

You can change what button captures the texture, what format it saves as, and where it saves to.
Once you have everything set to how you want it click on run and PCSX2 should start up.

What I like to do first is rip the textures then the model, though it really does not matter what you decide to do first.

For ripping the textures, click on "Config" on PCSX2, scroll down to "Video (GS)" and select "Plugin Settings..."
Make sure that you have these settings

Spoiler

Now just start your game and get to where the model you want to rip is.

Spoiler

Now press * (This will allow you to only cycle through the textures currently on screen. very useful if there is a large amount of textures loaded.)
and press + or - to cycle through the textures until you find the ones your model is using.
you should get something like this

Spoiler

Now just press whatever key you set to capture the texture (I used Enter) and it will save to where you set the output folder.
Repeat this for all the textures that your model uses.
Once that is done, go to you video plugin settings again and change
"Direct3D9 (Hardware)" to "Direct3D9 (Software)" like this

Spoiler

Now go back to your game and hold Shift and press F8. This will save a screenshot as well as an object file of that scene in your pcsx2 folder called "snaps"
Alright now open up your 3d editor and import the obj file that PCSX2 gave you.
These are the setting I use for 3dsmax

Spoiler

Alright notice how we have this

Spoiler

Just zoom in a little here and we notice that we can see the wireframe of the model we want

Spoiler

Just carefully delete all the stuff you don't want until you have what you are looking for.

Spoiler

Now that you have that done you have to scale down the model from its y-axis.
while it looks fine from the front, you may notice from the top it's really stretched.

Spoiler

How much you have scale it down can vary, so just keep going until you think it looks good

Spoiler

Now rotate the model right side up and mirror it an everything should start looking better

Spoiler

Alright, something that PCSX2 likes to do is rip the model twice.
What I do is select all meshes that start with f0_ and either move or delete them, although this isn't always the case.
Alright now what you have to do is scale the UVs. Why? because for whatever reason they are way too large.
Just appy an Unwrap UVW modifier and click edit. you will notice that not much is there.

Spoiler

Just zoom out and you will see everything eventually

Spoiler

Just start scaling them down untill you fit them whre they need to be, then flip them vertically.

Spoiler

After that is done you can start applying the textures, combineing whatever two meshes use the same texture and whatnot.
Now we are going to fix the normals.
export the model you have as an obj and re-import it.
next use a vertex weld modifier on everything (set to 0.1) and then appy a 'Normal modifier" and select unify normals.
you should get this

Spoiler

Now just apply the textures apply a "Smooth" modifier and you should now have something like this

Spoiler

Now just fix up any problems with the UVs and you have your finished model.

Extras

Fixing Textures

Spoiler

What you will need.
gimp
The texture you want to fix

When you rip the textures you may notice that them come out somewhat inverted, like this

Spoiler

Just load up the texture in gimp
under "Colors' got to "Components" then "Channel Mixer..."
Change the red slider to 0 and the blue slider to 100
then under "Output channel" change it to "Blue"
then change the red slider to 100 and the blue slider to 0
press ok then save the texture

Spoiler

now you are done.

About Backface Culling

Spoiler

As you might know, not all games render 3d models in the way.
While some will render the entire model, others will use what's called backface culling.
What this means is that nay geometry that is not 'seen' will not be rendered.
Take the game Wild Arms 3 for example. when you rip the model it may look ok from the front, but most of the back is not rendered

Spoiler

that is because the back part of the model was not "seen' by the ingame camera.
now if a game you are trying to rip from has backface culling then there isn't much you can do to fix it.
if you really wanted the model then you would have to capture the model from all sides then attempt to piece them together in your 3d editor.

Known games that use Backface Culling

Spoiler

All Kingdom Hearts games
Wild Arms 3

if you know of a game that uses backface culling, let me know so that I may add it to the list.