The VG Resource › The Resources › The Models Resource › Project Organization v
SPICA - General 3DS ripping tool


Users browsing this thread: 5 Guest(s)
SPICA - General 3DS ripping tool
gdkchan Offline
Member
*
Posts: 71
Threads: 3
Joined: Nov 2014
#1
06-26-2017, 10:17 PM (This post was last modified: 06-30-2017, 04:04 PM by gdkchan.)
What this is:

SPICA is a general model ripping tool to rip models from 3DS games. It supports the formats created by Nintendo for the system, and that quite a lot of games uses. Those formats are commonly know as BCH and CGFX (usually have bcres, bcmdl, bc*** extension). It also supports some formats specific to Pokémon games, since the focus of the tool was always supporting those games. Pokémon Sun/Moon introduced entirely new formats designed specially for the game, those are supported by the tool aswell, along with the animations from all three games (X/Y/OR/AS/Sun/Moon). It also supports Super Smash Bros for 3DS (mbn) model format and MT Framework model and texture formats (with severe issues!). I created a thread about MT Framework support aswell here, but I think there's not much interest for these formats, so I don't plan to keep working on them.

You can post questions or requests specific to this tool here, to avoid derailing the Pokémon ripping thread by RTB with such requests.

Planned features/fixes:

I'm also interested in hearing what is currently lacking the most on the tool, so I know where I should focus. Those are some features I plan to implement in no particular order:

- FBX export support
- DAE material anim export
- DAE import support
- Visibility anims on bch and cgfx
- Skeletal anims on cgfx
- Camera/lights/fog effects on both bch and cgfx, along with animations
- Export cameras and lights on DAE when above is done
- Compressed files support
- Containers support
- Pokémon Sun/Moon model, texture and animation creation.
- Pokémon X/Y/OR/AS model, texture and animation creation, with support for some game specific format like MM for the overworld models and GR/AD for the maps (WIP)
- CGFX creation (WIP)
- Also support formats that Ohana3DS used to, to make it a complete replacement (ZMDL from fantasy life, and New Love Plus model/textures are the ones not currently supported)
- Support models that uses silhouette effects with Geometry shader (ex: Atelier Rorona)
- Fix for Pokémon X/Y animation issue with characters leg/feet (also affects OR/AS, but just on few models) (Done)
- Fix billboard models issue on Pokémon (Cosmog/Koffing/...)
- Add a Material Viewer

It's a quite huge list, and supporting all those features will be a lot of work, so I'll always looking for help. I believe that the best way to build such tools is with the help of the community, so if you're interested, you can access the code repository clicking here: https://github.com/gdkchan/SPICA.

The above repository also contains link for automatic build of the tool for windows. Those are always up to date.

How to help:

The tool was written in C#, and the shaders in GLSL. Anyone that knows how to code in C# can help. There's some work on the GUI that needs to be done, and also some work related to rendering, so no experience reverse engineering stuff is necessary to contribute. I'm also interested in moving out of Windows Forms and using a solution that works on all major OSes (Windows, Linux and Mac).

TL;DR

Download is here: https://ci.appveyor.com/api/projects/gdk...astest.zip
Source is here: https://github.com/gdkchan/SPICA
Reply
Thanked by: Demonslayerx8, Lilothestitch, Yunpol, LGB, supersmashball, Random Talking Bush, Ziella, ~Axis~, RedBear, Okaps, YoshiCrystal, solitonmedic, Luke824, LukeWarnut, 06pori, DogToon64, JetTheFox96, Zektronic, BillyBnMOfficial
Demonslayerx8 Offline
SmashU Stage/Char Importer
Posts: 491
Threads: 9
Joined: Sep 2011
DeviantArt Facebook Twitter YouTube (/name)
#2
06-26-2017, 10:32 PM
maybe you can add support for a material viewer?
Reply
Thanked by:
gdkchan Offline
Member
*
Posts: 71
Threads: 3
Joined: Nov 2014
#3
06-27-2017, 02:12 PM
(06-26-2017, 10:32 PM)Demonslayerx8 Wrote: maybe you can add support for a material viewer?
I was thinking in adding a separate menu bar to allow editing material (and also other model stuff like meshes and the skeleton). But editing materials would be quite problematic with the current code since shaders are generated dynamically and most material related settings (and colors) are added as constants on the shader code. A viewer would be easier to make and maybe useful for making the model looking more like how it does on the 3DS after exporting. Added it to the list.
Reply
Thanked by: Demonslayerx8, Lilothestitch
Guy Offline
Okie~Dokie
**
Posts: 316
Threads: 17
Joined: Feb 2010
#4
06-28-2017, 03:09 AM
So this sounds like an interesting project, however when I try to run the latest build I get an error:

[Image: KUXR11p.png]
[+]Spoiler
Reply
Thanked by:
gdkchan Offline
Member
*
Posts: 71
Threads: 3
Joined: Nov 2014
#5
06-28-2017, 08:25 AM
(06-28-2017, 03:09 AM)Guy Wrote: So this sounds like an interesting project, however when I try to run the latest build I get an error:

[Image: KUXR11p.png]
[+]Spoiler
Seems to be a bug in your driver complaining about the ternary if. Can you try the lastest version? I made changes on the shader in a attempt to fix your issue.
Reply
Thanked by: Guy
Guy Offline
Okie~Dokie
**
Posts: 316
Threads: 17
Joined: Feb 2010
#6
06-28-2017, 10:03 AM
(06-28-2017, 08:25 AM)gdkchan Wrote: Seems to be a bug in your driver complaining about the ternary if. Can you try the lastest version? I made changes on the shader in a attempt to fix your issue.

Works like a charm, thank you gdkchan.
Reply
Thanked by:
andreelikesplantsvszombies Offline
Member
*
Posts: 75
Threads: 10
Joined: Oct 2014
#7
06-28-2017, 06:54 PM
Can you add the ability to remove textures, because I kept seeing ssb3ds models "black" and I want to get rid of it.
[Image: 1516121905957.gif]
Do the bowser!
Reply
Thanked by:
gdkchan Offline
Member
*
Posts: 71
Threads: 3
Joined: Nov 2014
#8
06-29-2017, 07:57 AM
(06-28-2017, 06:54 PM)andreelikesplantsvszombies Wrote: Can you add the ability to remove textures, because I kept seeing ssb3ds models "black" and I want to get rid of it.
Can you elaborate more? It was supposed to be the other way around: No textures = black model, textures = textured model. Which model you loaded that produced this result? Maybe it's a bug on the renderer.
Reply
Thanked by:
Carpaccio Online
Posting Freak
***
Posts: 1,674
Threads: 278
Joined: Jun 2008
#9
07-05-2017, 02:49 PM (This post was last modified: 07-05-2017, 02:55 PM by Carpaccio.)
A little issue I ran into on a few of the others I've been getting at, is missing planes after export. For example, this one, on preview, everything is properly assigned and visible, however after export to Collada, the 'eye' area vanishes without a trace and there is only one material group just labeled '_mat' with one texture applied to all areas of the model, rather than how it appears on preview. Exporting as SMD causes both the mouth and eye planes to vanish, and exporting as binary just crashes SPICA.

https://www.dropbox.com/s/61rzoz3t905sbr...2.zip?dl=0
Reply
Thanked by:
NotSoRed Offline
Junior Member
*
Posts: 14
Threads: 3
Joined: Nov 2016
#10
07-08-2017, 02:00 AM (This post was last modified: 07-08-2017, 02:02 AM by NotSoRed. Edit Reason: And tes I have the latest version )
(06-26-2017, 10:17 PM)gdkchan Wrote: What this is:

SPICA is a general model ripping tool to rip models from 3DS games. It supports the formats created by Nintendo for the system, and that quite a lot of games uses. Those formats are commonly know as BCH and CGFX (usually have bcres, bcmdl, bc*** extension). It also supports some formats specific to Pokémon games, since the focus of the tool was always supporting those games. Pokémon Sun/Moon introduced entirely new formats designed specially for the game, those are supported by the tool aswell, along with the animations from all three games (X/Y/OR/AS/Sun/Moon). It also supports Super Smash Bros for 3DS (mbn) model format and MT Framework model and texture formats (with severe issues!). I created a thread about MT Framework support aswell here, but I think there's not much interest for these formats, so I don't plan to keep working on them.

You can post questions or requests specific to this tool here, to avoid derailing the Pokémon ripping thread by RTB with such requests.

Planned features/fixes:

I'm also interested in hearing what is currently lacking the most on the tool, so I know where I should focus. Those are some features I plan to implement in no particular order:

- FBX export support
- DAE material anim export
- DAE import support
- Visibility anims on bch and cgfx
- Skeletal anims on cgfx
- Camera/lights/fog effects on both bch and cgfx, along with animations
- Export cameras and lights on DAE when above is done
- Compressed files support
- Containers support
- Pokémon Sun/Moon model, texture and animation creation.
- Pokémon X/Y/OR/AS model, texture and animation creation, with support for some game specific format like MM for the overworld models and GR/AD for the maps (WIP)
- CGFX creation (WIP)
- Also support formats that Ohana3DS used to, to make it a complete replacement (ZMDL from fantasy life, and New Love Plus model/textures are the ones not currently supported)
- Support models that uses silhouette effects with Geometry shader (ex: Atelier Rorona)
- Fix for Pokémon X/Y animation issue with characters leg/feet (also affects OR/AS, but just on few models) (Done)
- Fix billboard models issue on Pokémon (Cosmog/Koffing/...)
- Add a Material Viewer

It's a quite huge list, and supporting all those features will be a lot of work, so I'll always looking for help. I believe that the best way to build such tools is with the help of the community, so if you're interested, you can access the code repository clicking here: https://github.com/gdkchan/SPICA.

The above repository also contains link for automatic build of the tool for windows. Those are always up to date.

How to help:

The tool was written in C#, and the shaders in GLSL. Anyone that knows how to code in C# can help. There's some work on the GUI that needs to be done, and also some work related to rendering, so no experience reverse engineering stuff is necessary to contribute. I'm also interested in moving out of Windows Forms and using a solution that works on all major OSes (Windows, Linux and Mac).

TL;DR

Download is here: https://ci.appveyor.com/api/projects/gdk...astest.zip
Source is here: https://github.com/gdkchan/SPICA
I cannot use the program because of this error  Cry Cry Cry 
And, yes, I have the latest version.
[Image: p6lpYmB]
Reply
Thanked by:
gdkchan Offline
Member
*
Posts: 71
Threads: 3
Joined: Nov 2014
#11
07-08-2017, 08:12 AM
(07-08-2017, 02:00 AM)NotSoRed Wrote: I cannot use the program because of this error  Cry Cry Cry 
And, yes, I have the latest version.
[Image: p6lpYmB]
Looks like your gpu is too old to run this. It needs to support at least OpenGL 3.3. I plan to work on a command line version of the tool later so those with really old gpus, or that wants to batch export stuff have a better option.
Reply
Thanked by:
NotSoRed Offline
Junior Member
*
Posts: 14
Threads: 3
Joined: Nov 2016
#12
07-08-2017, 11:31 AM
(07-08-2017, 08:12 AM)gdkchan Wrote:
(07-08-2017, 02:00 AM)NotSoRed Wrote: I cannot use the program because of this error  Cry Cry Cry 
And, yes, I have the latest version.
[Image: p6lpYmB]
Looks like your gpu is too old to run this. It needs to support at least OpenGL 3.3. I plan to work on a command line version of the tool later so those with really old gpus, or that wants to batch export stuff have a better option.

When will this happen?  Sad
Reply
Thanked by:
Carpaccio Online
Posting Freak
***
Posts: 1,674
Threads: 278
Joined: Jun 2008
#13
07-09-2017, 03:28 AM
Any advice on my issue? I still can't figure out the problem.
Reply
Thanked by:
Makoto Offline
Silly mmder
*
Posts: 121
Threads: 11
Joined: Feb 2016
#14
08-20-2017, 06:31 AM
Hi. I am trying to ripping models from Project Mirai DX. I don't understand how to export models. If i do export it export only one texture, and if i do merge or batch export it asks for a input folder(the folder were the original model is located?) and the output. After selecting, it crashes.
Here is an example
https://sta.sh/010wo07g9hz4
Website
Reply
Thanked by:
Kold-Virus Offline
Classically-trained baritone
***
Posts: 1,053
Threads: 36
Joined: Nov 2014
Resource - Models Resource - Sounds
#15
08-20-2017, 04:38 PM
This looks fantastic.

But any reason I keep getting "Unsupported File Format" errors whenever I try to open anything? I tried SZS, BCH.
I'm an opera-crossover singer undergoing classical voice training and I'm also making Super Smash Bros. Feud.

Discord: kold_virus
Reply
Thanked by:


Forum Jump: